WindsorONE 2×8 Trim Board

SKU: N/A

Actual size 1 7/16″ x 7 1/4″. Factory primed finger jointed wood for deep fascia, barge boards, headers and structural looking trim, warranted 30 years against rot and insects. See the board size guide for how this compares with our other boards.

Actual size — nominal 2x8 6 options
SpeciesProfileThicknessWidthCode
MDF — 1 1/4" 7 1/4" 2X8MDF
WindsorONE Protected S4S 1 7/16" 7 1/4" 2X8RPS4S
WindsorONE Protected 16ft & 20ft S1S2E 1 7/16" 7 1/4" 2X8RPS1S2E
Flexible FJP — 1 7/16" 7 1/4" 2X8FLXFJP
Flexible MDF — 1 1/4" 7 1/4" 2X8FLXMDF
Flexible S4S 1 7/16" 7 1/4" 2X8FLXS4S

2 different thicknesses at 2x8: 1 1/4", 1 7/16". Check the species before butting materials together.

Note: Mouldings sold per linear foot (LF) are subject to lengths on hand. If special lengths are required, please contact our stores for an inventory check. Order the total quantity of LF desired and an order equaling that total will be assembled.

Shipping and returns

We offer free next-day delivery on orders over $300 within a 50-mile radius of any of our stores. For orders less than $300 within our radius, we charge a $65 delivery fee. For delivery sites outside of our 50-mile radius, we charge a $250 delivery fee, regardless of the amount purchased. Please click here to view a map of our delivery radius.

Product details

Nominal SizeWOS1 – 2 X 8
Wood SpeciesWood type classification to identify material characteristics.
Board Length10′, 16′, 20′, 4″ sample, 8′
Edge ProfileShows whether the board edges are square (sharp) or eased (rounded).S1S2E (1 Side Smooth, 2 Edges Eased)S1S2E (1 Side Smooth, 2 Edges Eased)Reversible, 1 rough sawn side, the rest smooth with 2 eased edges., S4S (Smooth 4 Sides)S4S (Smooth 4 Sides)Smooth on all four sides with crisp, square edges.

Description

WindsorONE 2×8 Trim Board

On a house with wide eaves, a thin fascia looks like an afterthought. WindsorONE 2×8 measures 1 7/16″ thick by 7 1/4″ wide, and it is built for deep fascia, barge boards, headers and structural looking trim.

Primer comes as standard here, which is part of why it costs more than bare stock. A 30 year warranty stands behind it against rot, insect attack and mould.

Smooth or sawn, your choice: S4SSE and S1S2E carry identical dimensions.

Miters especially: end grain drinks water, and a mitered corner has two of them.

This is surfaced trim, so 1 7/16″ rather than the 1 1/2″ people expect. Same as our 2×8 boards. For a different width, WindsorONE 2×6 is the next size down and WindsorONE 2×10 the next size up. Full net sizes for every profile are in the board size guide.

At this size the 20ft length matters. Joining a 2×8 fascia mid run is visible from the ground and always will be.

WindsorONE is a premium line of trim boards, mouldings, and specialty millwork known for exceptional craftsmanship, architectural accuracy, and consistently smooth finishes. Every board is precision‑milled, primed, and built to deliver long‑lasting performance for interior and exterior applications. Contractors choose WindsorONE for its reliability, crisp profiles, and superior paint adhesion.

Before you buy

Not sure this is the right profile? Each of these takes a minute.

See it in a room

Try profiles on a real room with your wall and floor colors before you order.

Open the room visualizer

Measure your job

Work out linear feet for one room or the whole house in seconds.

Open the calculator

Nominal vs actual size

Why a 1x4 is not four inches wide, and what you will really receive.

Board size guide

Customer Reviews