WindsorONE 2×10 Trim Board

SKU: N/A

Actual size 1 7/16″ x 9 1/4″. Factory primed finger jointed wood for skirt boards, deep fascia and stair skirts, warranted 30 years against rot and insects. See the board size guide for how this compares with our other boards.

Actual size — nominal 2x10 2 options
SpeciesProfileThicknessWidthCode
WindsorONE Protected 16ft & 20ft S1S2E 1 7/16" 9 1/4" 2X10RPS1S2E
Flexible FJP — 1 7/16" 9 1/4" 2X10FLXFJP

All 2x10 boards are 1 7/16" thick.

Note: Mouldings sold per linear foot (LF) are subject to lengths on hand. If special lengths are required, please contact our stores for an inventory check. Order the total quantity of LF desired and an order equaling that total will be assembled.

Shipping and returns

We offer free next-day delivery on orders over $300 within a 50-mile radius of any of our stores. For orders less than $300 within our radius, we charge a $65 delivery fee. For delivery sites outside of our 50-mile radius, we charge a $250 delivery fee, regardless of the amount purchased. Please click here to view a map of our delivery radius.

Product details

Nominal SizeWOS1 – 2 X 10
Wood SpeciesWood type classification to identify material characteristics.
Board Length10′, 16′, 20′, 4″ sample, 8′
Edge ProfileShows whether the board edges are square (sharp) or eased (rounded).S1S2E (1 Side Smooth, 2 Edges Eased)S1S2E (1 Side Smooth, 2 Edges Eased)Reversible, 1 rough sawn side, the rest smooth with 2 eased edges.

Description

WindsorONE 2×10 Trim Board

Wide, thick and only available with a rough sawn face, which suits the places it usually goes. WindsorONE 2×10 measures 1 7/16″ thick by 9 1/4″ wide, and it is built for skirt boards, deep fascia and stair skirts.

It holds paint the way wood does, which is the main thing PVC never quite manages. Rot and insects are what kill exterior trim, and both are covered for 30 years. Three coats of acrylic latex primer go on at the factory, so it arrives ready for topcoat.

S1S2E is the sole profile stocked here.

At 16ft and 20ft it outruns the 8ft stock most yards carry.

Thickness is 1 7/16″. Hold it against a framing 2x and the sixteenth is visible. Compare 2×10 boards. If you need more or less face, WindsorONE 2×8 is the next size down and WindsorONE 2×12 the next size up. See the WindsorONE range for the sizes either side of this one.

S1S2E only in this size, so if the detail demands a smooth face you will need to plane it or step down to 1×10.

WindsorONE is a premium line of trim boards, mouldings, and specialty millwork known for exceptional craftsmanship, architectural accuracy, and consistently smooth finishes. Every board is precision‑milled, primed, and built to deliver long‑lasting performance for interior and exterior applications. Contractors choose WindsorONE for its reliability, crisp profiles, and superior paint adhesion.

Before you buy

Not sure this is the right profile? Each of these takes a minute.

See it in a room

Try profiles on a real room with your wall and floor colors before you order.

Open the room visualizer

Measure your job

Work out linear feet for one room or the whole house in seconds.

Open the calculator

Nominal vs actual size

Why a 1x4 is not four inches wide, and what you will really receive.

Board size guide

Customer Reviews