WindsorONE 2×6 Trim Board

SKU: N/A

Actual size 1 7/16″ x 5 1/2″. Factory primed finger jointed wood for deep fascia, beam wraps, pergola rafters and headers, warranted 30 years against rot and insects. See the board size guide for how this compares with our other boards.

Actual size — nominal 2x6 5 options
SpeciesProfileThicknessWidthCode
WindsorONE Protected S4S 1 7/16" 5 1/2" 2X6RPS4S
WindsorONE Protected 16ft & 20ft S1S2E 1 7/16" 5 1/2" 2X6RPS1S2E
Primed FJ Cedar 16ft & 20ft S4S 1 7/16" 5 1/2" 2X6S4SPRIMEDCEDAR
Flexible FJP per ft — 1 7/16" 5 1/2" 2X6FLXFJP
Flexible per ft S4S 1 7/16" 5 1/2" 2X6FLXS4S

All 2x6 boards are 1 7/16" thick.

Note: Mouldings sold per linear foot (LF) are subject to lengths on hand. If special lengths are required, please contact our stores for an inventory check. Order the total quantity of LF desired and an order equaling that total will be assembled.

Shipping and returns

We offer free next-day delivery on orders over $300 within a 50-mile radius of any of our stores. For orders less than $300 within our radius, we charge a $65 delivery fee. For delivery sites outside of our 50-mile radius, we charge a $250 delivery fee, regardless of the amount purchased. Please click here to view a map of our delivery radius.

Product details

Nominal SizeWOS1 – 2 X 6
Wood SpeciesWood type classification to identify material characteristics.
Board Length10′, 16′, 20′, 4″ sample, 8′
Edge ProfileShows whether the board edges are square (sharp) or eased (rounded).S1S2E (1 Side Smooth, 2 Edges Eased)S1S2E (1 Side Smooth, 2 Edges Eased)Reversible, 1 rough sawn side, the rest smooth with 2 eased edges., S4S (Smooth 4 Sides)S4S (Smooth 4 Sides)Smooth on all four sides with crisp, square edges.

Description

WindsorONE 2×6 Trim Board

Some rooflines need a fascia with real presence, and 3/4 inch will not give it to them. WindsorONE 2×6 measures 1 7/16″ thick by 5 1/2″ wide, and it is built for deep fascia, beam wraps, pergola rafters and headers.

It is warranted against rot, insects and mould for three decades. Unlike cellular PVC it will not sag in heat, because it is wood. Three coats, factory applied, and the edges are done as well as the faces.

The S1S2E option gives one sawn face and eased edges. S4SSE is dressed all round.

The warranty assumes cut ends were sealed, so seal them.

1 7/16″, not 1 1/2″. We stock no 1 1/2″ board at all, and neither do our 2×6 boards. Should this be the wrong width, WindsorONE 2×4 is the next size down and WindsorONE 2×8 the next size up. The WindsorONE range has the companion sizes most jobs need alongside this one.

Heavy boards need heavier fixings. Two fasteners per bearing, and predrill near the ends.

WindsorONE is a premium line of trim boards, mouldings, and specialty millwork known for exceptional craftsmanship, architectural accuracy, and consistently smooth finishes. Every board is precision‑milled, primed, and built to deliver long‑lasting performance for interior and exterior applications. Contractors choose WindsorONE for its reliability, crisp profiles, and superior paint adhesion.

Before you buy

Not sure this is the right profile? Each of these takes a minute.

See it in a room

Try profiles on a real room with your wall and floor colors before you order.

Open the room visualizer

Measure your job

Work out linear feet for one room or the whole house in seconds.

Open the calculator

Nominal vs actual size

Why a 1x4 is not four inches wide, and what you will really receive.

Board size guide

Customer Reviews