WindsorONE 1×10 Trim Board
Actual size 3/4″ x 9 1/4″. Factory primed finger jointed wood for deep fascia, skirt boards, column wraps and porch ceilings, warranted 30 years against rot and insects. See the board size guide for how this compares with our other boards.
We offer free next-day delivery on orders over $300 within a 50-mile radius of any of our stores. For orders less than $300 within our radius, we charge a $65 delivery fee. For delivery sites outside of our 50-mile radius, we charge a $250 delivery fee, regardless of the amount purchased. Please click here to view a map of our delivery radius.
Product details
| Nominal Size | WOS1 – 1 X 10 |
|---|---|
| Wood SpeciesWood type classification to identify material characteristics. | Exterior Radiata Primed Pine |
| Board Length | 10′, 16′, 20′, 4″ sample, 8′ |
| Edge ProfileShows whether the board edges are square (sharp) or eased (rounded). |  S1S2E (1 Side Smooth, 2 Edges Eased)Reversible, 1 rough sawn side, the rest smooth with 2 eased edges.,  S4S (Smooth 4 Sides)Smooth on all four sides with crisp, square edges. |
Description
WindsorONE 1×10 Trim Board
Once a board passes nine inches it stops being trim and starts being a surface. WindsorONE 1×10 measures 3/4″ thick by 9 1/4″ wide, and it is built for deep fascia, skirt boards, column wraps and porch ceilings.
Three coats, factory applied, and the edges are done as well as the faces. It is warranted against rot, insects and mould for three decades.
S4SSE and S1S2E are both carried. The second has one sawn face, useful when you want the texture to show through paint.
Both 16ft and 20ft are stocked, so most runs can be done in a single piece.
The warranty assumes cut ends were sealed, so seal them.
Where our 1×10 boards change thickness with the species, WindsorONE is 3/4″ throughout. For a different width, WindsorONE 1×8 is the next size down and WindsorONE 1×12 the next size up. For how this measures against every other board we stock, use the board size guide.
Wide boards move more across their width, so leave a little room at butt joints and prime the end grain.
Before you buy
Not sure this is the right profile? Each of these takes a minute.
Know your trim
Every part named, so you order the profile you actually mean.
Interior trim anatomySee it in a room
Try profiles on a real room with your wall and floor colors before you order.
Open the room visualizerMeasure your job
Work out linear feet for one room or the whole house in seconds.
Open the calculatorNominal vs actual size
Why a 1x4 is not four inches wide, and what you will really receive.
Board size guide
